Panasonic KX-TAW848 Programming Manual

Also see for KX- TAW848: User guide User guide Installation manual User manual Features guide

Contents

Panasonic KX-TAW848 Programming Manual Manual pdf 93 page image

2.7 [1] ConfigurationPC Programming Manual 93Value RangeNot applicable.Maintenance Console Location2.7.11 [1-1] Slot—DPH Port CommandProgramming Manual References2.7.10 [1-1] Slot—DPH Card PropertyFeature Manual ReferencesNone2.7.12 [1-2] Portable StationVarious portable station (PS) settings can be programmed. A maximum of 28 PSs can be registered.PS Registration and De-registrationA PS must be registered to the PBX by programming both the PBX and PS before it can be used.Programming instructions of the PBX are given below; programming instructions of the PS are foundin the Installation Manual.It is possible to de-register the PS later.RegistrationFollow the steps below to register the PS.1. Click Registration.A dialog box will appear. Non-registered (available) extension numbers are displayed on theleft.2. Highlight numbers and click the right arrow to select them for registration. Click Next.A screen will appear with information on the current PS extension number and index numberfor programming.3. Register the relevant PS.For details, refer to the Installation Manual.→ 2.7.7 Connecting a Cell Station to the PBX4. Click Next.• If the PS registration is still in progress, the dialog box will show "Waiting for portablestation to register...". Click OK.• If the registration is successful, the dialog box will show "Registration Succeed".If there are more PSs to be registered, click Continue to resume. If not, click Close.Once a PS is successfully registered, the status of the PS will update to show "Registered".De-registrationFollow the steps below to de-register the PS.1. Click De-registration.A dialog box will appear. Registered extension numbers are displayed on the left.