Panasonic KX-TAW848 Programming Manual

Also see for KX- TAW848: User guide User guide Installation manual User manual Features guide

Contents

Panasonic KX-TAW848 Programming Manual Manual pdf 29 page image

2.2 FilePC Programming Manual 292.2 File2.2.1 File—NewCreates a new system data file, used to program the PBX in Batch mode. All settings are in their initialor default state.This option is only available at Installer level.To upload the file created here to the SD memory card installed in the PBX, see 2.5.2 Utility—FileTransfer PC to PBX (SD Card).NoteSince selecting this option creates a blank system data file, uploading this file to the PBX willoverwrite all previous settings. Use only when necessary.To create a new system data file1. From the File menu, select New.2. Click OK.2.2.2 File—OpenOpens a system data file previously saved on the PC, and enters Batch mode.When opening a file created with an older version of the Maintenance Console, you will be askedwhether you want to convert the data for use with the current version or not. Using the data withoutconverting may result in some data being loaded to an incorrect destination, and is notrecommended.For more details regarding file conversion, see 2.4.7 Tool—System Data Convert.If the file is not supported by the PBX (e.g. a system data file from an incompatible PBX), it will notbe opened. The only files that can be opened are files that were created by the Maintenance Consolefor a supported PBX.To upload a file opened here to the SD memory card installed in the PBX, see 2.5.2 Utility—FileTransfer PC to PBX (SD Card).To open a system data file1. From the File menu, select Open.The Open dialog box will be displayed.2. Navigate to the folder containing the system data file you want to open.3. Select the file.4. Click Open.If the file was created with an older version of the Maintenance Console, you will be asked if youwant to convert the data.• Click Yes to convert the data for use with the current version of the Maintenance Console.Enter a name for the new converted system file.• Click No to open the file as it is.