Panasonic KX-TAW848 Programming Manual

Also see for KX- TAW848: User guide User guide Installation manual User manual Features guide

Contents

Panasonic KX-TAW848 Programming Manual Manual pdf 69 page image

2.7 [1] ConfigurationPC Programming Manual 69Feature Manual References1.5.7 Extension Port ConfigurationTelephone TypeIndicates the connected telephone type (reference only).The number of all connected telephones and Cell Stations can be viewed by clicking Port Type View.DefaultCurrent connected telephone typeValue RangeAPT: APT is connected.DSS: DSS Console is connected.VM: VPS is connected.SLT: SLT is connected (or no telephone is connected to the Hybrid or SLT port).CS: CS is connected.No Connection: No telephone is connected.Maintenance Console Location2.7.4 [1-1] Slot—Extension PortProgramming Manual References2.7.6 [1-1] Slot—Extension Port—Port Type ViewFeature Manual References1.5.7 Extension Port ConfigurationConnectionIndicates the port status (reference only).This column offers two ways to open the screen to select the port command as follows:• Click the desired cell in the column.• Select the desired cell in the column, and then click Command.DefaultCurrent statusValue RangeINS: The port is in service.OUS: The port is out of service.Fault: The port is not communicating with the PBX.Maintenance Console Location2.7.4 [1-1] Slot—Extension PortProgramming Manual References2.7.5 [1-1] Slot—Extension Port—Port Command