2.3 Connect34 PC Programming Manual2.3.4 Connect—Profile SetupProfiles are useful when one PC is used to connect to multiple PBXs. Rather than manually adjustingthe connection settings each time a different PBX is accessed, it is possible to store the connectionsettings for several PBXs. Then, when you wish to connect to a specific PBX, you can simply choosethat PBX's profile from the list.The functions of the buttons on this screen are as follows:To create or edit a profile• From the Connect menu, select Profile Setup.2.3.5 Connect—Profile EditorAllows the creation and editing of profiles of settings required to connect the PC to the PBX by RS-232C, modem, or USB.Dial Type Auto(Tone),Auto(Pulse), ManualSpecify the outgoing dialing method.If Manual is chosen, dialing must be done witha connected telephone.Comment – Enter a comment to identify the set of values.Port COMx Specify the number of the COM port assignedto the PC's modem interface.Only available COM ports will be displayed.Baud Rate 1200bps, 2400bps,4800bps, 9600bps,19200bps, 38400bpsSpecify the speed of data transmission.Modem Initialize – Enter the modem initialize command, and clickInitialize to send the command to the modem.For more details, refer to your modem'sinstruction manual.Button FunctionNew Opens the 2.3.5 Connect—Profile Editor window to create a newprofile.Edit When an existing profile is selected, opens the 2.3.5 Connect—ProfileEditor window to modify the parameters of that profile.Delete When an existing profile is selected, deletes that profile. A confirmationmessage will be displayed.Close Closes the current window.Connection Settings for ModemSetting Values Description
