2.7 [1] Configuration60 PC Programming Manual2.7 [1] Configuration2.7.1 [1-1] SlotThe operating characteristics associated with each service card can be programmed.Move the mouse pointer over an installed card to display the menu of options for that card. To view asummary of status and MPR versions for all cards installed in the PBX, click the Summary button(see 2.7.2 [1-1] Slot—Summary).To install a new card to the PBX1. Click on the name of the card to install in the list on the right.An image of the card will be displayed to the left of the list, and information about the card will beshown below.2. Click and drag the image of the card to the free slot it is to be installed in, and release it.The card will move into the slot space.3. Click Yes to confirm.To access card properties1. Move the mouse pointer over a card.A menu will be shown under the mouse pointer.2. Select Card Property.The property screen for that card will be displayed.To access port properties1. Move the mouse pointer over a card.A menu will be shown under the mouse pointer.2. Select Port Property.The property screen for that card's port or ports will be displayed.To remove a card from the PBX1. Move the mouse pointer over the card to remove.A menu will be shown under the mouse pointer.2. Select Delete Card.3. Click Yes to confirm.The card will be removed.To change the status (INS/OUS) of a card (Interactive mode only)1. Move the mouse pointer over the card.A menu will be shown under the mouse pointer.2. Select the desired status:• Click INS to set the card to in-service status.• Click OUS to set the card to out-of-service status.
