2.5 UtilityPC Programming Manual 47This option is only available at Installer level, and requires that at least 1 MSG card is installed. TheMSG card must be set to OUS status.To transfer OGMs to the PC1. From the Utility menu, select Message File Transfer PBX to PC.2. From the upper drop-down list, select the target MSG card.3. From the lower drop-down list, select the messages to transfer.• To transfer a certain message, select the number of that message.• To transfer all messages at once, select "ALL".The Save dialog box will be displayed.4. Enter a file name.5. Click Save.6. Click OK.When you choose to transfer all messages, each message is saved as an individual file, with anumber appended to the file name corresponding to that message's location on the MSG card.When complete, the display will return to the main screen.2.5.8 Utility—Error LogCollects and displays system error information.Whenever there is a system failure, the PBX stores the error code generated. The connected PCcollects all of these codes, along with other information, and displays an explanatory error message.The functions of the buttons on this screen are as follows:The items displayed on screen are as follows:Button FunctionCancel Closes the Error Log screen without saving.Capture Saves the currently displayed Error Log information as a text file.Minor Displays minor errors, which affect only a certain part of systemoperation.Major Displays major errors, which affect operation of the whole system,or result in system failure.Clear Erases the stored error log information from both the screen andthe PBX.Log Information Displays probable causes of the errors and their solutions.Item DescriptionIndex The ordinal number assigned to an error record in the current log.Date The date of the error detection.Time The time of the error detection.