Panasonic KX-TAW848 Programming Manual

Also see for KX- TAW848: User guide User guide Installation manual User manual Features guide

Contents

Panasonic KX-TAW848 Programming Manual Manual pdf 122 page image

2.8 [2] System122 PC Programming ManualSVM—Dial Tone Continuous TimeSpecifies the length of time that dial tone 3 is heard after all messages stored by the SVM feature foran extension are finished playing.Default5 sValue Range1–60 sMaintenance Console Location2.8.4 [2-3] Timers & CountersProgramming Manual References2.10.7 [4-1-6] Wired Extension—Simplified Voice Message2.10.12 [4-2-4] Portable Station—Simplified Voice MessageFeature Manual References1.16.5 SVM (Simplified Voice Message)2.8.5 [2-4] Week TableA specific time mode (day, night, lunch, or break) can be selected for operation depending on the timeof day. The time mode can be switched either automatically or manually. Select the desired switchingmode from the Time Service Switching Mode option.Time Table numbers correspond to tenant numbers (for example, Tenant 1 uses Time Table 1). Selectthe desired Time Table from the Time Table No. list.When in Automatic Switching mode, the time modes of the tenant are switched as programmed in thecorresponding Time Table. Manual switching is possible only from an authorized extension(determined by COS).• To adjust the currently displayed Time Table, click and drag the divisions between two timeperiods.• To program the time blocks of the currently displayed Time Table, including adding ordeleting time blocks, click Time Setting.2.8.6 [2-4] Week Table—Time SettingThe start times of 4 different time blocks can be programmed for each day of the week, for theselected Time Table, as well as the start and end times of up to 3 break periods.1. Day/Lunch/Night—Day1 Start, Lunch Start, Day2 Start, Night Start—SettingEnables the setting of the start time for each time block.