1.6 F92 Feature Manual1.6.5 Floating ExtensionDescriptionVirtual extension numbers can be assigned to resources to make them as easily accessible as extensions.These numbers are referred to as "floating extension numbers" and can be assigned as a destination ofincoming calls, intercepted calls, etc.This feature is also known as Floating Station.Conditions• Certain resources which are assigned a floating extension number can also be assigned a name.Programming ReferencesPC Programming Manual2.8.8 [2-6-1] Numbering Plan—Main—Extension2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings—Main→ Floating Extension Number→ Group Name2.9.16 [3-7-2] VM(DPT) Group—Unit Settings—Floating Extension No.2.9.19 [3-8-2] VM(DTMF) Group—Group Settings—Floating Ext. No.2.9.21 [3-9] PS Ring Group—Floating Extension NumberResource Description DefaultDevice External Pager Used as the destination for the Trunk Answer FromAny Station (TAFAS) feature. (→ 1.17.1 TAFAS(Trunk Answer From Any Station))600Outgoing Message(OGM)Used to play messages for callers via the DirectInward System Access (DISA) feature. (→ 1.4.6DISA (Direct Inward System Access))5 + two-digitOGM numberSimplified VoiceMessage (SVM)Used to access message boxes associated withextensions. (→ 1.16.5 SVM (Simplified VoiceMessage))SVM card 1:591SVM card 2:592Analog RemoteMaintenanceUsed to access PC programming mode through amodem on a PC. 599Group Incoming CallDistribution (ICD)GroupUsed to call an ICD group. (→ 1.9.1 ICD GROUPFEATURES) 6 + two-digitgroup numberPS Ring Group Used to call a PS ring group. (→ 1.13.14 PS RingGroup) —VM (DPT) Group Used to call a VM (DPT) group. 500 (VM [DPT]Group 1)VM (DTMF) Group Used to call a VM (DTMF) group. —
