Panasonic KX-TAW848 Feature Manual

Also see for KX- TAW848: User guide User guide Installation manual User manual Features guide

Contents

Panasonic KX-TAW848 Feature Manual Manual pdf 216 page image

1.19 V216 Feature Manual2.9.16 [3-7-2] VM(DPT) Group—Unit Settings2.9.18 [3-8-1] VM(DTMF) Group—System Settings2.9.19 [3-8-2] VM(DTMF) Group—Group SettingsPT Programming Manual[601] Terminal Device Assignment[660] VM Group Floating Extension NumberFeature Manual References1.19.4 Voice Mail DPT (Digital) Integration1.19.5 Voice Mail DTMF Integration2.1 Capacity of System Resources1.19.4 Voice Mail DPT (Digital) IntegrationDescriptionA Panasonic VPS that supports DPT (Digital) Integration (e.g., the KX-TVP200) can be connected to thisPBX in a tightly integrated fashion.DPT (Digital) Integration features can be used when the VPS is connected through APT or hybrid ports ofthe PBX.Feature Explanation1. Automatic Configuration—Quick SetupThe PBX informs the VPS of its extension numbers and the floating extension numbers of the incomingcall distribution groups so that the VPS can create mailboxes with this data automatically.2. FWD to a Mailbox of the VPSIf an extension user sets FWD to the VPS, incoming calls are forwarded to the VPS. (→ 1.6.6 FWD (CallForwarding)) The PBX sends a mailbox number of the forwarding extension to the VPS. Therefore thecaller can leave a message in the mailbox of the extension without knowing the mailbox number.3. Intercept Routing to a Mailbox of the VPSIf an extension user sets Intercept Routing to the VPS, the intercepted CO line calls will be redirectedto the VPS. (→ 1.9.9 Intercept Routing) If the "Intercept to Mailbox" setting is enabled throughsystem programming, the PBX sends the mailbox number of the intercepted extension to the VPS.Therefore the caller can leave a message in the mailbox of the extension without knowing the mailboxnumber.→ 2.9.15 [3-7-1] VM(DPT) Group—System Settings—Intercept to Mailbox4. Transferring to a Mailbox of the VPSAn extension user can transfer a call to a mailbox of the VPS so that the caller can leave a message inthe mailbox of the desired extension. (→ 1.3.8 Call Transfer) The extension user should use the VoiceMail (VM) Transfer button, when transferring a call to the mailbox of the VPS. When the extension userpresses this button and enters the desired extension number, the PBX will transfer the call to the VMgroup and dial the mailbox number of the desired extension number with the required command (afterthe VPS answers the call). Therefore the caller can leave a message without knowing the mailboxnumber.5. Transfer Recall to a Mailbox of the VPSIf a call is transferred to an extension via the Automated Attendant (AA) service of the VPS and the callis not answered within a preprogrammed Transfer Recall time, the PBX sends the mailbox number of