1.14 Q172 Feature Manual1.14.2 Quick SetupDescriptionBasic PBX parameters can be programmed the first time the PBX is accessed with a PC using the KX-TAW848 Maintenance Console software.When the PBX is accessed with the Installer Level Programmer Code and default password (→ 1.13.3Password Security), for the first time (i.e., accessed after the PBX's settings have been initialized or whenthe PBX's settings are still set to their default values), Quick Setup will launch automatically. From here thefollowing basic parameters can be programmed as desired:Note that the programmable items may vary depending on the version of KX-TAW848 Maintenance Consolebeing used.Item Parameter DescriptionDate & Time Set Year/Month/Date/Hour/MinuteThe date and time set on the PC can be used by default.SystemPassword forInstaller4–10 characters Enter the system password for installer (→ 1.13.3 PasswordSecurity).Operator &ManagerExtensionNumberAssign a PBX operator. (→ 1.12.3 Operator Features) Thisextension will be the operator for all time modes, and isautomatically assigned manager status to perform manageroperations. (→ 1.11.1 Manager Features)FlexibleNumbering Type1. Pattern 1(with )2. Pattern 2(without )Select whether or not the prefix " " must be entered before dialingfeature numbers.[Example] Call Pickup feature numberPattern 1 (with ): 41Pattern 2 (without ): 41Note that certain feature numbers (Line Access numbers, OperatorCall, etc.) never need this prefix.For a list of the default flexible numbers, refer to the [FlexibleNumbering Table (available while a dial tone is heard)] (→ 1.6.4Flexible Numbering/Fixed Numbering).ExtensionNumberFrom 101/from201Determines the number from which default extension numbersbegin.Operator 0/9 The feature number for Operator Call can be selected.Local Access 0/1/9 The feature number for Idle Line Access can be selected.RemoteMaintenanceNumberRemoteMaintenance DialNumberEnter the complete telephone number of the PBX (including thecountry code). When necessary, this number will be used to accessthe PBX from a remote location for maintenance purposes.
