1.3 C36 Feature Manual1.3.5 Call ParkDescriptionAn extension user can place a call into a common parking zone of the PBX. The Call Park feature can beused as a transferring feature; this releases the user from the parked call to perform other operations. Aparked call can be retrieved by any extension user.Conditions• Automatic Call ParkIt is possible to select an idle parking zone automatically.• RetryIf the specified parking zone is occupied or there is no vacant zone for Automatic Call Park, theoriginator will hear a busy tone. Retrying is possible while hearing a busy tone by selecting anotherparking zone or a vacant zone.• Call Park RecallIf a parked call is not retrieved within a preprogrammed time period, the Call Park Recall tone will beheard at the Transfer Recall destination assigned to the extension which parked the call. If thedestination is engaged in a call, the Hold Alarm will be heard.• If a parked CO line call is not retrieved within a preprogrammed time period (Default: 30 minutes), it isautomatically disconnected.• Call Park ButtonPressing the Call Park button parks or retrieves a call in a preset parking zone.Any flexible button can be customized as the Call Park button. It shows the current status of the presetparking zone as follows:• Call Park (Automatic Park Zone) ButtonPressing the Call Park (Automatic Park Zone) button parks a call in an idle parking zone automatically.Any flexible button can be customized as the Call Park (Automatic Park Zone) button.• Call Park Retrieve DenyInternal Call Block (→ 1.9.12 Internal Call Block) also determines which extensions' calls an extensionuser can retrieve from a parking zone, i.e., if extension 101 cannot call extension 201, then it cannotretrieve extension 201's parked calls either.Programming ReferencesPC Programming Manual2.8.4 [2-3] Timers & Counters→ Recall—Call Park Recall→ Recall—Disconnect after Recall2.8.8 [2-6-1] Numbering Plan—Main—Features—Call Park / Call Park Retrieve2.10.4 [4-1-4] Wired Extension—Flexible Button→ Type→ Parameter Selection (for Call Park)Light pattern StatusSlow red flashing A call is parked in the preset parking zoneOff There are no parked calls
