1.20 W230 Feature Manual[005] Extension Personal Identification Number (PIN)Feature Manual References1.3.16 COS (Class of Service)1.4.6 DISA (Direct Inward System Access)Operating Manual References1.3.57 Walking COS1.20.2 Walking ExtensionDescriptionIt is possible for an extension user to trade extension settings with another extension.When Walking Extension is executed, all extension settings (extension number, Class of Service (COS),One-touch Dialing memory, etc.) of the "old" extension are exchanged with the "new" extension.This feature is useful when an extension user moves desks, or when an extension user has no permanentdesk.This feature is also known as Walking Station.Conditions• This feature allows extension settings to be switched between PTs and SLTs. Moving between tenantsis also possible.• Incoming calls to your extension will reach you at your new location.• An extension personal identification number (PIN) is required to use this feature. (→ 1.5.6 ExtensionPIN (Personal Identification Number))• If a DSS Console is connected to a PT and the DSS Console is continuously used with the PT after theWalking Extension has been performed, the new extension number of the PT must be assigned as thepaired extension through system programming.• If the Walking Extension feature is performed at the same time that the target extension is beingprogrammed by PC, the Walking Extension feature may not work properly. (→ 1.13.5 PC Programming)Programming ReferencesPC Programming Manual2.8.8 [2-6-1] Numbering Plan—Main—Features—Walking Extension2.10.1 [4-1-1] Wired Extension—Extension Settings—Option 2—Extension PIN2.10.13 [4-3] DSS Console—Flexible Button—Pair ExtensionPT Programming Manual[007] DSS Console Paired TelephoneOperating Manual References1.3.58 Walking Extension
