29Power supply: DC 10.8 V to DC 16 VPower consumption: 9.0 WGeneralAmbient operating temperature14°F to 122°F (–10°C to +50°C)Storage temperature–4°F to +140°F (–20°C to +60°C)Ambient operating humidity30% to 90% (no condensation)Weight3.1 lbs. (1.4 kg)Dimensions (WHD)8-1/4”6-15/16”2-5/16” (21017758 mm)(excluding protrusions)FinishAV ivory paint (color resembling Munsell 7.9Y 6.8/0.8)Pan/tilt heads supportedAW-PH300, AW-PH300A, AW-PH350, AW-PH360,AW-PH500, AW-PH600, AW-PH650Cameras supportedAW-E300, AW-E300A, AW-E600, AW-E800, AW-E800A,AW-E350, AW-E650, AW-E655, AW-E750, AW-E860Input connectorsDC 12V IN socketDC jackGNDPlease ground before using the unit.Output connectorsMONITOR SELECT connectorRJ45Connecting cable:10BASE-T straight cables (UTP category 5),max. 164 feet (50 meters)Input/Output connectorsTALLYD-SUB, 15-pinREMOTE/SERVICERS-232CTO PAN/TILT HEAD [1/EXT, 2 to 5] connectorsRJ45 5, control signal output for pan/tilt headsConnecting cable:10BASE-T straight cables (UTP category 5),max. 3,280 feet (1,000 meters)OtherREMOTE/SERVICE switchMaintenance switch. Set in the “R” position during use.ZOOM REVERSE switchUsed to reverse the polarity of the ZOOM lever.ZOOM/FOCUS EXCHANGE switchUsed to replace the ZOOM lever with the FOCUS lever orvice versa.FOCUS REVERSE switchUsed to reverse the polarity of the FOCUS lever.TILT REVERSE switchUsed to reverse the polarity of the TILT lever.PAN REVERSE switchUsed to reverse the polarity of the PAN lever.Weight and dimensions shown are approximate.Specifications are subject to change without notice.Specificationsindicates safety information.