Panasonic AW-RP555N Operating Instructions Manual

Contents

Panasonic AW-RP555N Operating Instructions Manual Manual pdf 11 page image

11Parts and their functions ZOOM REVERSE [NOR/REV] switch(Setting at shipment: NOR)This is used to select the lens zoom operation which is tobe performed by operating the ZOOM lever.When it is set to NOR, the zoom moves toward thetelephoto end when the ZOOM lever is tilted toward TELEor it moves toward the wide-angle end when the lever istilted toward WIDE.When it is set to REV, the zoom operates in the reversedirections. ZOOM/FOCUS EXCHANGE [ON/OFF] switch(Setting at shipment: OFF)This is used to select the ZOOM lever and FOCUS leverfunctions. When it is set to OFF, the ZOOM lever adjuststhe zoom operation of the lens, and the FOCUS leveradjusts its focus operation.When it is set to ON, the ZOOM lever adjusts the focusoperation of the lens, and the FOCUS lever adjusts itszoom operation. FOCUS REVERSE [NOR/REV] switch(Setting at shipment: NOR)This is used to select the lens focus operation which is tobe performed by operating the FOCUS lever.When it is set to NOR, the point at which the lens isfocused moves further away when the FOCUS lever istilted toward FAR, and it comes closer when the lever istilted toward NEAR.When it is set to REV, focusing operates in the reversedirections. TILT REVERSE [NOR/REV] switch(Setting at shipment: NOR)This is used to select the operation of the pan/tilt headsystem in the vertical direction (tilting) which is to beperformed by operating the PAN/TILT lever.When it is set to NOR, the pan/tilt head system movesupward when the PAN/TILT lever is tilted toward UP, andit moves downward when the lever is tilted toward DOWN.When it is set to REV, the tilting operates in the reversedirections.Normally, set this switch to REV when using theAW-PH300 for the pan/tilt head system in astand-alone installation.When the switch is set to REV, the pan/tilt headsystem moves upward when the PAN/TILT lever istilted toward UP, and it moves downward when thelever is tilted toward DOWN. PAN REVERSE [NOR/REV] switch(Setting at shipment: NOR)This is used to select the operation of the pan/tilt headsystem in the horizontal direction (panning) which is to beperformed by operating the PAN/TILT lever.When it is set to NOR, the pan/tilt head system movestoward the left when the PAN/TILT lever is tilted towardLEFT, and it moves toward the right when the lever istilted toward RIGHT. When it is set to REV, the panningoperates in the reverse directions.Normally, set this switch to REV when using theAW-PH300 for the pan/tilt head system in astand-alone installation.When the switch is set to REV, the pan/tilt headsystem moves toward the left when the PAN/TILT leveris tilted toward LEFT and it moves toward the rightwhen the lever is tilted toward RIGHT.ZOOMREVERSENOR REV NOR REV NOR REV NOR REVOFF ONZOOM/FOCUSEXCHANGEFOCUSREVERSETILTREVERSEPANREVERSEFront panel switches