Panasonic AW-RP555N Operating Instructions Manual

Contents

Panasonic AW-RP555N Operating Instructions Manual Manual pdf 12 page image

12Parts and their functions GND terminalUse to ground the unit. DC12V IN terminalConnects the AW-PS505A AC adapter (sold separately). TALLY IN connectorConnect this to the TALLY connector on the videoswitcher or other units.When the TALLY connector is set to the GND level, theTALLY lamp () lights. Do not apply a voltage in excessof 5 V to this connector.Pin No. Signal Name1 TALLY19 TALLY22 TALLY310 TALLY43 TALLY511 TALLY GND4 –––12 –––5 –––13 –––6 –––14 –––7 –––15 –––8 ––– REMOTE/SERVICE connectorA personal computer or other external equipment isconnected here when a pan/tilt head system is to becontrolled by these equipments.Pin No. Signal Name1 –––2 RXD IN3 TXD OUT4 DTR5 GND6 DSR7 RTS8 CTS9 ––– REMOTE/SERVICE switch(Setting at shipment: R)Function selection switch for the REMOTE/SERVICEconnector. Set the switch in the “R” position during use.TALLY5TALLY3TALLY1TALLY2TALLY4TALLY GNDR5 4 3 2 1/EXTSTALLY INREMOTE/SERVICETO PAN/TILT HEAD MONITOR SELECTDC12V INGNDPin layout as seen from theback of AW-RP555Rear connector panel