353. Convenient Features Displaying Two Pictures at the Same TimeThe projector has a feature that allows you to view two different signals simultaneously. You have two modes: PIPmode and PICTURE BY PICTURE mode.From the menu you can select [SETUP] → [BASIC] → [PIP/PICTURE BY PICTURE].The [PIP/PICTURE BY PICTURE] menu item has the following three options: MODE, POSITION, and SOURCE.Use the or button to select [MODE], [POSITION] or [SOURCE] and press the ENTER button.Selecting the PIP or PICTURE BY PICTURE Mode [MODE]This option allows you to select two modes: PIP and SIDE BY SIDE.Use the or button to select [PIP] or [PICTURE BY PICTURE] and press the ENTER button.PIP: This option allows you to view a sub picture in the main picture.Main pictureSubpicturePICTURE BY PICTURE: This allows you to view two pictures side by side.Main picture Sub pictureNOTE:• The main picture will be displayed on the left side and the sub picture on the right side.• The main picture signal supports the COMPUTER 1, COMPUTER 2, and COMPUTER 3 connectors.The sub picture signal supports the VIDEO IN and S-VIDEO IN connectors.• The main picture supports an RGB signal with a resolution of 1280 × 1024 pixels or less.
