1365. Using On-Screen MenuTOOLSADMINISTRATOR MODEThis allows you to select MENU MODE, save settings, and set a password for the administrator mode.MENU MODE Select either [BASIC] or [ADVANCED] menu.(→ page 84)—NOT SAVE SETTINGVALUESPlacing a check mark will not save your projector settings�Clear this check box to save your projector settings�—NEW PASSWORD/CONFIRM PASS-WORDAssign a password for the administrator mode. Up to 10 alphanumericcharactersNOTE:When [LAST] is selected for [DEFAULT SOURCE SELECT], placing a check mark for [NOT SAVE SETTING VALUES] will forciblyselect NETWORK for source at every power-on time.To avoid this, select [AUTO] for [DEFAULT SOURCE SELECT].TIP:To return to the ADVANCED menu from the BASIC menu, do the following:1. Use the SOURCE button on the cabinet or press the NETWORK button on the remote control to select[NETWORK] to display the APPLICATION MENU.2. Select [TOOLS] → [ADMINISTRATOR MODE] → [MENU MODE] → [ADVANCED MODE].
