1476. Installation and ConnectionsConnecting Your DVD Player or Other AV EquipmentConnecting BNC Input• Select the source name for its appropriate input connector after turning on the projector.NOTE: The AUDIO IN L and R jacks (RCA) are shared between the Video and S-Video inputs.NOTE: Refer to your VCR owner’s manual for more information about your equipment’s video output requirements.NOTE:• An image may not be displayed correctly when a Video or S-Video source is played back in fast-forward or fast-rewind via a scanconverter.• Video signals can be projected when a video cable (commercially available) is connected to the Computer 3 video input connector’sG/Y connector.In this case, set the on-screen menu’s SETUP → OPTION(1) → SIGNAL SELECT(COMP3) to [VIDEO] and select Computer 3 forthe input selection.CV Y CBNC ( C ) INAUDIO INBNC ( CV ) INBNC ( Y ) INAudio cable (not supplied)BNC cable (not supplied)Audio equipmentAudio cable (not supplied)
