142. Projecting an Image (Basic Operation)Standby Blinking Power OnSteady orange light Blinking blue light Steady blue light Turning on the Projector1. Remove the lens cap.2. Press the (POWER) button on the projector cabinetor the POWER ON button on the remote control.The POWER indicator will turn to blue and the projectorwill become ready to use.TIP:• When the message “PROJECTOR IS LOCKED! ENTER YOURPASSWORD.” is displayed, it means that the [SECURITY]feature is turned on. (→ page 37)• When the ECO message is displayed, it means that [ON] isselected for [ECO MESSAGE]. (→ page 102)• Pressing buttons such as power button and MENU button willmake sound. To turn off the beep sound, select [OFF] for [BEEP]from the menu. (→ page 109)After you turn on your projector, ensure that the computeror video source is turned on.NOTE: A blue screen (blue background) is displayed when no signalis being input (by factory default menu settings).(→ page 214)
