1486. Installation and ConnectionsConnecting Component Input• Select the source name for its appropriate input connector after turning on the projector.NOTE:• Normally the computer signal and component signal are identified and switched automatically. If the signal cannot be identified,however, select the signal at [ADJUST] → [VIDEO] → [SIGNAL TYPE] on the projector’s on-screen menu. Select “COMPUTER” or“VIDEO” for the Computer 3 video input connector at [SETUP] → [OPTION (1)] → [SIGNAL SELECT(COMP)] (→ page 109).• To connect to a video device with a D connector, use the sold separately D connector converter adapter (model ADP-DT1E).AUDIO INCOMPUTER INAUDIO IN15-pin - to - RCA (female) × 3cable adapter (ADP-CV1E)RCA (female) - to - BNC (male)connector (not supplied)Stereo mini plug - to - RCA audiocable (not supplied)Component video RCA × 3 cable(not supplied)DVD player Audio Equipment
