935. Using On-Screen Menu[COLOR CORRECTION]Corrects the color for all signals.Adjusts the tone for the colors red, green, blue, yellow, magenta and cyan.RED ����������������������� Adjusts the color in red areas, centered around the red�This can be used to adjust to a yellow- or magenta-tinged red�GREEN ������������������� Adjusts the color in green areas, centered around the green�This can be used to adjust to a yellow- or cyan-tinged green�BLUE���������������������� Adjusts the color in blue areas, centered around the blue�This can be used to adjust to a violet- or cyan-tinged blue�YELLOW ���������������� Adjusts the color in yellow areas, centered around the yellow�This can be used to adjust to a red- or green-tinged yellow�MAGENTA �������������� Adjusts the color in magenta areas, centered around the magenta�This can be used to adjust to a red- or blue-tinged magenta�CYAN ��������������������� Adjusts the color in cyan areas, centered around the cyan�This can be used to adjust to a green- or blue-tinged cyan�[CONTRAST]Adjusts the intensity of the image according to the incoming signal.[BRIGHTNESS]Adjusts the brightness level or the back raster intensity.[SHARPNESS]Controls the detail of the image.[COLOR]Increases or decreases the color saturation level.[HUE]Varies the color level from +/− green to +/− blue. The red level is used as reference.Input signal CONTRAST BRIGHTNESS SHARPNESS COLOR HUECOMPUTER/DisplayPort/HDMI (RGB) Yes Yes Yes No NoCOMPUTER/DisplayPort/HDMI(COMPONENT) Yes Yes Yes Yes YesVIDEO/S-VIDEO/COMPONENT Yes Yes Yes Yes YesVIEWER/NETWORK Yes Yes Yes No NoYes = Adjustable, No = Not adjustable[RESET]The settings and adjustments for [PICTURE] will be returned to the factory settings with the exception of the following;Preset numbers and [REFERENCE] within the [PRESET] screen.The settings and adjustments under [DETAIL SETTINGS] within the [PRESET] screen that are not currently selectedwill not be reset.
