E – 43When the tool bar is not displayed:Press the FOLDER LIST button on the remote control to display fold-ers from a PC card in the projector’s PC Card slot.Use the SLIDE +/- button toadvance to the next folder orreturn to the previous folder.Folder Folder Folder FolderFolderSlide Slide Slide SlideSlide Slide Slide SlideSlideSlide(Table) cursor (green marks)Use the SLIDE +/- button toadvance to the next slide or re-turn to the previous slide.Auto Play Mode• If the “Auto Play” option is selected in “PC Card Viewer Options” ofthe menu, any given slide will start to play automatically. You canalso specify Auto Play Interval between 5 and 300 seconds.Switching to Slides Directly from Other InputModesWith this function it is possible to switch directly to a slide when thepicture of a VCR or computer is being projected.Example:When conducting presentations using a combination of slides andmoving pictures from a VCR, etc., it is possible to switch from a PCCard Viewer slide to the video picture then back to the PC Card Viewerslide simply by using a source button and PC CARD button.NOTE: Even if you switch the current PC Card Viewer source to another source,the current slide is retained. When you return back to the PC Card Viewer, youwill get the slide that has been retained.NOTE: The PC card editing operation cannot be performed from the projector.Do so using the PC Card Viewer software.FolderLit redWorks as the Select buttonon the projector.RGB 1MENU LASERRGB 2 P JMulti cursor (blue marks)SLIDENOTE: You can also use the ßand ©button on the remote control to selectfolders or slides.If you use the ßand ©button on the remote control for PC Card Viewer opera-tion, press the PJ button to switch to the Projector mode and the PJ buttonlights red.KEYSTONEFREEZEPIC-MUTEHELP POINTER PC CARDVIDEO S-VIDEO AUTO ADJ.RGB 1MENU LASERR-CLICK /CANCELRGB 2 PJONOFFMAGNIFYVOL.SLIDEFOLDERSLIDELIST