NEC MultiSync MT1055 User Manual

Also see for LCDMT1050: Installation data Installation data Installation data

Contents

NEC MultiSync MT1055 User Manual Manual pdf 26 page image

E – 23MENUENTERCANCELSELECTPOWERSTATUSON/STAND BYSOURCEAUTO ADJUSTAC INS-VIDEOVIDEOAUDIORGB INPUT 2AUDIORGB INPUT 1L / MONORAUDIORGB MONITOROUTPUTUSBPC-CARDC CONTROL MOUSEOUT REMOTCONTRINPUS-VIDEOVIDEOAUDIORGB INPUT 2AUDIORGB INPUT 1L / MONORAUDIORGB MONITOROUTPUTVIDEOS-VIDEOR LR LVIDEOVCR/ Laser disc playerS-video cable (not supplied)Audio equipmentAudio cable (not supplied)Document cameraVideo cable (not supplied)Connecting Your VCR or Laser Disc PlayerUse common RCA cables (not provided) to connect your VCR, laser disc player or document camera to your projector.To make these connections, simply:1. Turn off the power to the projector and VCR, laser disc player or document camera.2. Connect one end of your RCA cable to the video output connector on the back of your VCR or laser disc player, connect the other end to the Videoinput on your projector. Use an audio cable (not supplied) to connect the audio from your VCR or laser disc player to your audio equipment (if yourVCR or laser disc player has this capability). Be careful to keep your right and left channel connections correct for stereo sound.3. Turn on the projector and the VCR or laser disc player.NOTE: Refer to your VCR or laser disc player owner’s manual for more information about your equipment’s video output requirements.