NEC MT1050 Installation Data

Also see for LCDMT1050: User manual Installation data Installation data

Contents

timing chart

NEC MT1050 Installation Data Manual pdf 1 page image

Visual Systems DivisionTechnical BulletinMT1050 Installation Datawith Optional MT10RL Rear Lens (1.0:1) Rev. 1.7Page 1ContentsProduct Description, Lens Specs, Notes and Formulas Page 1Projection Distances and Screen SizesRear Projection Installation Page 2Other ApplicationsRear Projection Systems Page 3Cabinet DimensionsTop, Front and Right Side Page 4Bottom, Back and Left Side Page 5Timing Chart Page 6PC Control Codes Page 7Product DescriptionType: 3 panel, 1.3” p-Si TFT LCD projector Dimensions: 11.1”(W) x 5.3”(H) x 16.9”(D) (w/lens installed)Native Resolution: 1024 x 768 Weight: 17.4 lbs (w/lens installed)Brightness: 2100 ANSI LumensLens SpecificationsMT10RL Zoom LensThrow Ratio: 0.94 – 1.01:1 Screen Sizes: 40 – 300” DiagonalOffset Angle: 0° Distortion: 0.5% TV DistortionFocal Length: 27mm MTF (@30 lp/mm Green): Ctr >70% Corner >60%F/#: 2.3 AR Coated: Multi-Layer CoatedFocus Adjustment: Manual Focus Chromatic Aberration: Max 10 μmNotesß For Screen Sizes of 40 to 300 inches not indicated on the projection tables, use the formulas below.ß If the figures on the tables do not match the results of formulas, use the figures in the table.ß The ceiling must be strong enough to support the LCD projector and the installation must be in accordance with any localbuilding codes.• All calculations are based on 4:3 aspect ratio.• Distances are in inches, for millimeters multiply by 25.4.• Distances may vary ±5%.FormulasUnits: Inches (for millimeters multiply final number by 25.4)D = Screen Diagonal (4:3)H = D x 0.8 H = Screen Width (4:3)V = D x 0.6 V = Screen Height (4:3)M = 0.95403H M = Projection magnificationC = 1.0681M – 2.468 C = Throw distanceα = 0° α = Throw angle