NEC MultiSync MT1055 User Manual

Also see for LCDMT1050: Installation data Installation data Installation data

Contents

NEC MultiSync MT1055 User Manual Manual pdf 32 page image

E – 293. In order for the changes to take effect, use the ß or © button onthe remote control or the projector cabinet to highlight “OK”,then press the Enter button. To cancel the changes, use the s ort buttons to highlight “Cancel” and press the “Enter” button.To return to the factory default, select “Reset” then press the “En-ter” button.The default Basic/Custom Menu items are:Source Select (RGB1/2, Video, S-Video and PC Card Viewer), Pic-ture, Volume, Image Options (Keystone, Color Temperature andLamp Mode), Projector Options (Menu and Setup), Tools (Capture,PC Card Files and ChalkBoard) and Help (Contents and Informa-tion)NOTE: Once you have selected OK on the Basic/Custom Menu Edit screen, youcannot cancel the changes on the Menu screen. However, you can re-edit themenu items over again as described in the steps above.NOTE: If the “Advanced Menu” item has been selected on the Menu mode, youget the “Confirmation Change Menu” upon completion of “Basic/Custom Menu”editing. In this case, selecting “Yes” then “Enter” will close all the menus andapply the changes from the Advanced menu to the Basic/Custom Menu. If youselect “No” then “Enter” functions, then all menu items will return to the Ad-vanced menu, but your changes will still be available within the “Basic/CustomMenu” selection. To display the previously tailored Basic/Custom Menu, select“Basic/Custom Menu” from the “Menu Mode”.An item “To Advanced Menu” will be added to the bottom of the Basic/Custom Menu.Selecting this item and pressing the “Enter” button will display the “Ad-vanced Menu” features.