805. Using On-Screen MenuHints on How to Set Up LAN ConnectionTo connect a DHCP server:From the projector menu, select [SETUP] → [WIRED LAN] → [SETTINGS] → [DHCP] → [ON] and press the ENTERbutton. To specify IP address without using the DHCP server, use the HTTP server. (→ page 39)To set only for wireless LAN (NETWORK TYPE and WPA2 PSK):Access the HTTP server to display the web browser (→ page 36) and select [NETWORK SETTINGS] → [SET-TINGS] → [WIRELESS LAN] → [INFRASTRUCTURE] and then click [APPLY].Make necessary settings for [SETTINGS], click [SAVE] for storing set values and then click [APPLY] to reflectthese values to wireless LAN connection.To select an SSID:Access the HTTP server to display the web browser (→ page 36) and select [NETWORK SETTINGS] → [SET-TINGS] → [WIRELESS LAN] → [INFRASTRUCTURE] and then click [APPLY]. After completion of these steps,click [SETTING] for the INFRASTRUCTURE and then click [SITE SURVEY] on the [CONNECTION] page, finallyselect the SSID you want to connect on the list.If you do not use [SITE SURVEY], type the SSID in [CONNECTION]. (→ page 40)To receive lamp replacement time or error messages via e-mail:Access the HTTP server to display the web browser (→ page 36) and select [NETWORK SETTINGS] → [ALERTMAIL], and set [SENDER’S ADDRESS], [SMTP SERVER NAME], and [RECIPIENT’S ADDRESS]. Last, click[SAVE]. (→ page 41)
