122. Projecting an Image ( Basic Operation)❸ Turning on the Projector1. Remove the lens cap.Press and hold the two dent part on the lens cap and pullit toward you.2. Press the (POWER) button on the projector cabinetor the POWER ON button on the remote control.The POWER indicator will blink and the projector willbecome ready to use.TIP:• When the message “Projector is locked! Enter your password.”is displayed, it means that the [SECURITY] feature is turned on.(→ page 31)After you turn on your projector, ensure that the computeror video source is turned on.NOTE: When no input signal is present, the no-signal guidance isdisplayed (factory menu setting).(→ page 108)Standby Blinking Power OnSteady red light Blinking bluelightSteady bluelight
