243. Convenient Features2. Press the ▲▼◀▶ button.The area of the magnified image will be moved3. Press the D-ZOOM (−) button.Each time the D-ZOOM (−) button is pressed, the image is reduced.NOTE:• The image will be magnified or demagnified at the center of the screen.• Displaying the menu will cancel the current magnification.❹ Changing Eco Mode/Checking Energy-Saving EffectUsing Eco Mode [ECO MODE]The ECO MODE (NORMAL and ECO) increases lamp life, while lowering power consumption and cutting down onCO2 emissions.Four brightness modes of the lamp can be selected: [OFF], [AUTO ECO], [NORMAL] and [ECO] modes.[ECO MODE] Description Status of LAMP indicator[OFF] The lamp brightness is 100%. Off[AUTO ECO] Lamp power consumption will be changed between[OFF] and [NORMAL] automatically according topicture levelNOTE: A bright gradation may be less visible dependingon the image.[NORMAL] Lamp power consumption: approx.80% brightness.The lamp life will extend by lowering the lamp power.Steady Greenlight[ECO] Lamp power consumption (approx. 60% brightness).The lamp life will extend longer than the one onNORMAL mode by controlling power appropriate forthe lamp. The maximum power becomes equivalentto the power in NORMAL.To turn on the [ECO MODE], do the following:1. Press the ECO Button on the remote control to display [ECO MODE] screen.2. Press the ECO button again to select a mode you wish.• Each time the ECO button is pressed, the choices will be changed:OFF → AUTO ECO → NORMAL → ECO → OFFTIP:• The leaf symbol at the bottom of the menu shows the current selection of ECO mode.
