705. Using On-Screen MenuTurning ON/OFF Control ID [ID DISPLAY]This option turns on or off the ID number which is displayed when the ID SET button on the remote control is pressed.Turning On / Off Eco Message [ECO MESSAGE]This option turns on or off the following messages when the projector is turned on.The Eco Message prompts the user to save energy. When [OFF] is selected for [ECO MODE], you will get a messageto prompt you to select [AUTO ECO], [NORMAL], or [ECO] for [ECO MODE].When [AUTO ECO], [NORMAL], or [ECO] is selected for [ECO MODE]To close the message, press any one of the buttons. The message will disappear if no button operation is done for30 seconds.When [OFF] is selected for [ECO MODE]Pressing the ENTER button will display the [ECO MODE] screen. (→ page 24)To close the message, press the EXIT button.Selecting Menu Display Time [DISPLAY TIME]This option allows you to select how long the projector waits after the last touch of a button to turn off the menu. Thepreset choices are [MANUAL], [AUTO 5 SEC], [AUTO 15 SEC], and [AUTO 45 SEC]. The [AUTO 45 SEC] is thefactory preset.Selecting a Color or Logo for Background [BACKGROUND]Use this feature to display a blue/black screen or logo when no signal is available. The default background is [BLUE].NOTE:• If the [LOGO] item is selected for [BACKGROUND] with the [LAN] or [USB-B] source selected, the [BLUE] item will be selectedregardless of its selection.• When [SOURCE DISPLAY] is turned on, the no-signal guidance prompting you to check for an available input will be displayedat the center of the screen regardless of its selection.• Your setting will not be affected even when [RESET] is done from the menu.Selecting Interval Time for Filter Message [FILTER MESSAGE]This option allows you to select the time preference between displaying the message for cleaning the filters. Cleanthe filter when you get the message “PLEASE CLEAN THE FILTER.” (→ page 100)Six options are available:OFF, 100[H], 500[H], 1000[H], 2000[H], 5000[H]NOTE: Your setting will not be affected even when [RESET] is done from the menu.
