635. Using On-Screen MenuAdjusting Horizontal/Vertical Position [HORIZONTAL/VERTICAL]Adjusts the image location horizontally and vertically.- An image can be distorted during the adjustment of [CLOCK] and [PHASE]. This is not malfunction.- The adjustments for [CLOCK], [PHASE], [HORIZONTAL], and [VERTICAL] will be stored in memory for thecurrent signal. The next time you project the signal with the same resolution, horizontal and vertical frequency,its adjustments will be called up and applied.To delete adjustments stored in memory, from the menu, you select [RESET] → [CURRENT SIGNAL] or [ALLDATA] and reset the adjustments.Selecting Overscan Percentage [OVERSCAN]Select overscan percentage (AUTO, 0%, 5% and 10%) for signal.Projected imageOverscaned by 10%NOTE:• The [0[%]] cannot be selected when VIDEO signal is used.• The [OVERSCAN] item is not available:- when [NATIVE] is selected for [ASPECT RATIO].
