423. Convenient Features• NETWORK SERVICEPJLink PASSWORD Set a password for PJLink*. A password must be 32 characters or less. Do not forgetyour password. However, if you forget your password, consult with your dealer.HTTP PASSWORD Set a password for HTTP server. A password must be 10 characters or less.AMX BEACON Turn on or off for detection from AMX Device Discovery when connecting to the networksupported by AMX’s NetLinx control system.TIP:When using a device that supports AMX Device Discovery, all AMX NetLinx control system willrecognize the device and download the appropriate Device Discovery Module from an AMX server.Placing a checkmark will enable detecting the projector from AMX Device Discovery.Clearing a checkmark will disable detecting the projector from AMX Device Discovery.*What is PJLink?PJLink is a standardization of protocol used for controlling projectors of different manufacturers. This standardprotocol is established by Japan Business Machine and Information System Industries Association (JBMIA) in 2005.The projector supports all the commands of PJLink Class 1.Setting of PJLink will not be affected even when [RESET] is done from the menu.CRESTRON ROOMVIEW compatibilityThe projector supports CRESTRON ROOMVIEW, allowing multiple devices connected in the network to be managedand controlled from a computer or a controller.For more information, visit http://www.crestron.comAccess to the HTTP server, and make necessary settings for [CRESTRON] in [NETWORK SETTINGS].• ROOMVIEW for managing from the computer.DISABLE Disables ROOMVIEW.ENABLE Enables ROOMVIEW.• CRESTRON CONTROL for managing from the controller.DISABLE Disables CRESTRON CONTROL.ENABLE Enables CRESTRON CONTROL.IP ADDRESS Set your IP address of CRESTRON SERVER.IP ID Set your IP ID of CRESTRON SERVER.TIP: The CRESTRON settings are required only for use with CRESTRON ROOMVIEW.For more information, visit http://www.crestron.com• INFORMATIONWIRED LAN Display a list of settings of wired LAN connection.WIRELESS LAN Display a list of settings of wireless LAN connection.UPDATE Reflect settings when they are changed.
