Lenovo RackSwitch G8264 Command Reference Manual

Also see for RackSwitch G8264: Installation guide Product guide Product guide Application guide Installation guide

558 G8264 Command Reference for ENOS 8.4OSPFv3 Host Entry ConfigurationThe following table describes the OSPFv3 Host Entry commands.no area virtual link <1‐3> encryption ipsec spi <256‐4294967295>Disables the specified Encapsulating Security Payload (ESP) SPI.Command mode: Router OSPF3area virtual link <1‐3> encryption ipsec defaultResets the IPsec encryption configuration to its default values.Command mode: Router OSPF3show ipv6 ospf area virtual linkDisplays the current OSPFv3 virtual link settings.Command mode: AllTable 295. Layer 3 IPsec Configuration Options (continued)Command Syntax and UsageTable 296. OSPFv3 Host Entry Configuration OptionsCommand Syntax and Usagehost <1‐128> address address> length (1‐128)>Configures the base IPv6 address and the subnet prefix length for the hostentry.Command mode: Router OSPF3host <1‐128> area <0‐2>Configures the area index of the host.Command mode: Router OSPF3host <1‐128> cost <1‐65535>Configures the cost value of the host.Command mode: Router OSPF3[no] host <1‐128> enableEnables or disables the host entry.Command mode: Router OSPF3no host <1‐128>Deletes the host entry.Command mode: Router OSPF3show ipv6 ospf host [<1‐128>]Displays the current OSPFv3 host entries.Command mode: All