Lenovo RackSwitch G8264 Command Reference Manual

Also see for RackSwitch G8264: Installation guide Product guide Product guide Application guide Installation guide

540 G8264 Command Reference for ENOS 8.4OSPF Virtual Link ConfigurationThe following table describes the OSPF Virtual Link commands.Table 284. OSPF Virtual Link Configuration OptionsCommand Syntax and Usagearea virtual link <1‐3> area <0‐19>Configures the OSPF area index for the virtual link.Command mode: Router OSPFarea virtual link <1‐3> dead interval <1‐65535>area virtual link <1‐3> dead interval <1000‐65535 ms>Configures the health parameters of a hello packet, in seconds or milliseconds.The default value is 40 seconds.Command mode: Router OSPF[no] area virtual link <1‐3> enableEnables or disables OSPF virtual link.Command mode: Router OSPFarea virtual link <1‐3> hello interval <1‐65535>area virtual link <1‐3> hello interval <50‐65535 ms>Configures the authentication parameters of a hello packet, in seconds ormilliseconds.The default value is 10 seconds.Command mode: Router OSPFarea virtual link <1‐3> key Configures the password (up to eight characters) for each virtual link.The default setting is none.Command mode: Router OSPFno area virtual link <1‐3> keyRemoves the authentification key.Command mode: Router OSPFarea virtual link <1‐3> message digest key <1‐255>Sets MD5 key ID for each virtual link.The default setting is none.Command mode: Router OSPFno area virtual link <1‐3> message digest keyRemoves the MD5 key ID for the specified virtual link.Command mode: Router OSPF