Lenovo RackSwitch G8264 Command Reference Manual

Also see for RackSwitch G8264: Installation guide Product guide Product guide Application guide Installation guide

214 G8264 Command Reference for ENOS 8.4Port StatisticsThese commands display traffic statistics on a port‐by‐port basis. Traffic statisticsinclude SNMP Management Information Base (MIB) objects.Table 89. Port Statistics CommandsCommand Syntax and Usageshow interface port alias or number> bitrate usageDisplays the traffic rate in kilobits per second.Command mode: Allshow interface port alias or number> bridging countersDisplays bridging (“dot1”) statistics for the port. See page 222 for sampleoutput.Command mode: Allshow interface port alias or number> bridging rateDisplays per‐second bridging (“dot1”) statistics for the port.Command mode: Allshow interface port alias or number> dot1x countersDisplays IEEE 802.1X statistics for the port. See page 217 for sample output.Command mode: Allshow interface port alias or number> egress queue counters[ number (0‐7)>|drop]Displays the total number of packets and bytes either successfully transmittedor dropped for each queue of the specified ports. queue number filters the output to the specified queue number drop lists only the queues with dropped traffic (non‐zero counters fordropped packets/bytes counters)See page 233 for sample output.Command mode: Allshow interface port alias or number> egress queue rate[ number (0‐7)>|drop]Displays the number of packets and bytes per second either successfullytransmitted or dropped for each queue of the specified ports. queue number filters the output to the specified queue number drop lists only the queues with dropped traffic (non‐zero rates for droppedpackets/bytes)See page 234 for sample output.Command mode: All