Lenovo RackSwitch G8264 Command Reference Manual

Also see for RackSwitch G8264: Installation guide Product guide Product guide Application guide Installation guide

534 G8264 Command Reference for ENOS 8.4Open Shortest Path First ConfigurationThe following table describes the OSPF commands.Table 280. OSPF Configuration OptionsCommand Syntax and Usagerouter ospfEnter Router OSPF configuration mode.Command mode: Global configurationarea <0‐19>Configures OSPF area index. See page 535 to view command options.Command mode: Router OSPFarea range <1‐16>Configures summary routes for up to 16 IP addresses. See page 537 to viewcommand options.Command mode: Router OSPFarea virtual link <1‐3>Configures the Virtual Links used to configure OSPF for a Virtual Link. Seepage 540 to view command options.Command mode: Router OSPFdefault information <1‐16777214> external metric type (1‐2)>Sets one default route among multiple choices in an area.Command mode: Router OSPFno default informationRemoves the default route information.Command mode: Router OSPF[no] enableEnables or disables OSPF on the G8264.Command mode: Router OSPFhost <1‐128>Configures OSPF for the host routes. Up to 128 host routes can be configured.Host routes are used for advertising network device IP addresses to externalnetworks to perform server load balancing within OSPF. It also makes AreaBorder Route (ABR) load sharing and ABR failover possible.See page 542 to view command options.Command mode: Router OSPFlsdb limit limit (0‐16384, 0 for no limit)>Sets the link state database limit.Command mode: Router OSPF