Automatic Shutter Mode (AutomaticShutter Adjustment)1 Press the [SHUTTER] button or set the[FULL AUTO] switch to “ON” to enterAutomatic Shutter mode.0 The a icon appears on the screen.0 The camera recorder enters the AutomaticShutter mode. The shutter speed isautomatically adjusted according to thebrightness of the object.Memo :0 Switching of shutter speed with the cross-shaped button (JK) and switching of shuttermode with the Set button (R) are disabled.0 You can set the controllable range for theAutomatic Shutter in [Main Menu] B [CameraFunction] B [EEI Limit].(A P99 [ EEI Limit ] )Setting the ND FilterUse the ND filter to keep the lens aperture in theappropriate range.Switch according to the brightness of the object.When the position on the switch is changed, theselected position of the ND filter is displayed on theLCD monitor and viewfinder screen.(Display 2 screen)Memo :0 When [Main Menu] B [LCD/VF] B [DisplaySettings] B [ND Filter] is set to “Off”, the positionof the ND filter will not be displayed.(A P110 [ ND Filter ] ).ND FILTER1/641/161/4OFF.P13000K 1/ 100F1.60dBAE+6ND 1 /6412 :34 :56Jan 24,201200: 00: 00.004030 20 10 05 . 6f tND 1 /64Memo :0 It is recommended to use the ND filter to set thelens aperture to less than F8.ND Filter Warning DisplayIn order to adjust the amount of light when you areshooting at a relatively bright location, the diameterof the iris may become extremely small, causingblurry effects to occur as a result.This phenomenon is known as “small aperturediffraction”. You can make appropriate use of NDfilters to prevent it from occurring.This unit displays an ND filter warning whennecessary to prompt you to select an appropriateND filter.1 Set [Main Menu] B [LCD/VF] B [DisplaySettings] B [ND Filter] to “On+Assist”.(A P110 [ ND Filter ] )2 When the iris diameter becomes too smallwhile adjusting the light intensity, or whenan ND filter is used in a dimly-lit location,the ND filter display starts blinking.58Shooting
