Date/TimeFor specifying whether to display the date and timein the display on the LCD monitor and viewfinderscreen.[Setting Values: ROn, Off]Date StyleFor setting the date display sequence for displayon the LCD monitor and viewfinder screen as wellas for time stamp recording.Display examples of the setting values are asfollows.0 DMY2: 30 Jun 20120 DMY1: 30-06-20120 MDY2: Jun 30, 20120 MDY1: 06-30-20120 YMD: 2012-06-30[Setting Values: DMY2, DMY1, MDY1, MDY2,YMD](Default values: MDY2 (U model), DMY1 (Emodel))Time StyleFor setting the time display for display on the LCDmonitor and viewfinder screen as well as for timestamp recording.[Setting Values: 24hour, 12hour](Default values: 12hour (U model), 24hour (Emodel))ShutterFor setting the shutter display to be displayed onthe LCD monitor and viewfinder screen.0 DEG:Displays the shutter speed in degrees in thesame way as film cameras.0 SEC:Displays the shutter speed in seconds.[Setting Values: DEG, RSEC]Memo :0 “DEG” is selectable only when [WFrame & BitRate] is set to “24p(UHQ)”, “24p(HQ)” or“25p(HQ)”.When [WFrame & Bit Rate] is set to other values,the shutter display setting is fixed at “SEC” andcannot be selected.(A P117 [ W Frame & Bit Rate ] )A/V Set MenuMenu screen for video output and audio.Video Set...For specifying video output-related settings.(A P111 [Video Set Item] )Audio Set...For specifying audio-related settings.(A P112 [Audio Set Item] )Video Set ItemDisplay On TVFor setting whether to display the display and menucharacters on the external monitor.[Setting Values: On, ROff]HDMI/SDI OutFor setting the terminal to output the video.[Setting Values: HDMI+SDI, SDI, HDMI, ROff]Memo :0 When the [Network] setting is set to “On(SDIOff)”, “HDMI+SDI” and “SDI” are not selectable.And when “On(HDMI Off)” is set, “HDMI+SDI”and “HDMI” are not selectable.9 ResolutionFor selecting the resolution of video output from the[HDMI]/[SDI] terminal according to the monitor tobe connected.[Setting Values: 576i, 576p, 480i, 480p, 720p,R1080i]Memo :0 The selectable options vary according to thesetting in [System]/[WResolution]/[WFrame &Bit Rate] of [System] B [Record Set] B [RecordFormat].0 Cross conversion output is not possible.9 HDMI Color0 For setting the color format of HDMI signals.0 This item is selectable only when [HDMI/SDIOut] is set to “HDMI” or “HDMI+SDI”.[Setting Values: RGB, RAuto]111Menu Display and Detailed Settings
