Camera Process MenuMenu screen for adjusting the quality of cameraimages.This item cannot be selected in the Media mode.DetailFor adjusting the contour (detail) enhancementlevel.Increasing the value increases the sharpness ofthe contour.[Setting Values: -10 to +10, Off (R0)]9 Adjust...For specifying the detailed settings of the contour(detail).(A P104 [Detail/Adjust Item] )Memo :0 This item cannot be selected when [Detail] is setto “Off”.Master BlackFor adjusting the pedestal level (master black) thatserves as the reference black.Increasing the value increases the pedestal.[Setting Values: -50 to +50 (R-3)]Black ToeProcess the dark areas according to the balance ofbright and dark areas in the image to adjust theoverall balance of contrast.For altering the gain of dark areas. Adjust this itemaccording to the condition of the captured videosignals.0 Stretch:Increases the gain of dark areas in an image tostretch the signals of these areas only, therebyshowing the contrast between bright and darkareas more clearly.Specify the amount of stretch with [StretchLevel].0 Normal:Normal condition.0 Compress:Compresses the gain of dark areas to increasethe contrast when the entire image appearsbright and contrast is weak. Specify thecompression amount with [Compress Level].[Setting Values: Stretch, RNormal, Compress]Memo :0 When [WDR] is set to other than “Off”, this itemappears as “---” and cannot be selected.9 Stretch LevelStretch amount increases when a larger value isspecified.[Setting Values: 1 to 5 (R 3)]Memo :0 This item is displayed only when [Black Toe] isset to “Stretch”. Otherwise, this item appears as“---” and cannot be selected.9 Compress LevelCompression amount increases when a largervalue is specified.[Setting Values: 1 to 5 (R 3)]Memo :0 This item is displayed only when [Black Toe] isset to “Compress”. Otherwise, this item appearsas “---” and cannot be selected.KneeFor specifying the “Knee” operation, whichcompresses video signals beyond a certain level toshow the gradation of the highlighted portion. Tocheck the gradation of a bright area, set to “Manual”and adjust the knee point (starting point of kneeoperation) manually.0 Manual:Enables manual adjustment of knee point using[Level].0 Auto:Adjusts the knee point automatically accordingto the luminance level.[Setting Values: Manual, RAuto]Memo :0 When [WDR] is set to other than “Off”, this itemappears as “---” and cannot be selected.9 LevelFor setting the starting point (knee point) of kneecompression when [Knee] is set to “Manual”.[Setting Values: R100.0%, 97.5%, 95.0%, 92.5%,90.0%, 87.5%, 85.0%]Memo :0 When [Knee] is set to other than “Auto”, or[WDR] is set to other than “Off”, this itemappears as “---” and cannot be selected.102Menu Display and Detailed Settings
