Display Settings ItemThis menu is used to set the displays on the LCDmonitor and viewfinder screen.ZoomFor setting the display method of the zoomposition.0 Number:Displays the zoom position in numbers (0-99).0 Bar:Displays the zoom position in a bar.0 Off:Does not display the zoom position.[Setting Values: Number, RBar, Off]FocusFor setting the display method of the focal lengthduring manual focus.0 Feet:Displays the focus in feet.0 Meter:Displays the focus in meters.0 Off:Does not display the focal length during focus.[Setting Values: Feet, RMeter, Off]ND FilterFor setting whether to display the filter position.0 On+Assist:Displays the current filter position.If the ND filter setting is inappropriate, theappropriate ND filter to select will appearblinking.0 On:Displays the current filter position.0 Off:Hides the filter position.[Setting Values: On+Assist, ROn, Off]Record FormatFor setting whether to display the video formatduring recording or playback.[Setting Values: ROn, Off]Media RemainFor setting whether to display the remaining spaceof the recording SD card.[Setting Values: ROn, Off]Memo :0 When the remaining space warning isdisplayed, the information appears even when“Off” is selected.0 The displayed time is an estimate.TC/UBFor specifying whether to display the time code(TC) or user’s bit (UB) rate in the display on the LCDmonitor and viewfinder screen.[Setting Values: UB, RTC, Off]Audio MeterFor specifying whether to display the audio levelmeter on the LCD monitor and viewfinder screen.[Setting Values: ROn, Off]BatteryFor setting the display of the remaining batterypower in the display on the LCD monitor andviewfinder screen.The battery information appears only on theDisplay 1 screen in Camera mode.(A P129 [Display 1 screen] )0 Time:Displays the remaining battery power inminutes. (min)0 Capacity%:Displays the remaining battery power inpercentage. (%)0 Voltage:Displays the current battery voltage in units of0.1 V. (V)0 [Off]:The remaining battery power is not displayed.[Setting Values: RTime, Capacity%, Voltage, Off]Memo :0 The battery mark that appears before the “Time”,“Capacity%” or “Voltage” value changesaccording to the remaining battery power.4 : 10 % and belowD : 11 % to 30 %C : 31% to 70 %B : 71 % to 100 %0 When the remaining battery power is low, “RES”instead of the value is displayed.Replace the battery as soon as possible.0 The remaining battery power and remainingtime are intended as reference values for theshooting duration.110Menu Display and Detailed Settings
