User Switch Set ItemUSER1 - USER7, LCD KEY▲/LCD KEY▶/LCDKEY▼/LCD KEY◀By assigning one of the following functions to eachof the [FOCUS ASSIST/1], [OIS/2], [LOLUX/3], [AELOCK/4], [ZEBRA/5], [MARKER/6], [C.REVIEW/7]buttons or the cross-shaped buttons on the LCDmonitor, these buttons can be used to control theassigned function (on/off, start, switch).Set according to the shooting conditions. Usableonly in the Camera mode.[Setting Values: None, Zebra, Marker, Bars, FocusAssist, OIS, Flash Band, LCD Backlight, Lolux, AELock, Spot Meter, Face Detect, OK Mark, ClipCutter Trig, Backup Trig, Clip Review, Load PictureFile, White Balance, Preset Zoom1, Preset Zoom2,Preset Zoom3, One Push Focus, One Push Iris,Expanded Focus, Live Streaming]Front RECFor setting the function of the [REC] button locatedbelow the lens at the front of the unit.0 REC:Functions as a record button for starting/endingrecording.0 AWB:When the [WHT BAL B/A/PRESET] selectionswitch is set to “A” or “B” in the Manual WhiteBalance mode, it functions as an AWB startupbutton. If the [WHT BAL B/A/PRESET] selectionswitch is set to “PRESET”, it functions as abutton for switching between two colortemperature settings.(A P59 [Manual White Balance Mode (ManualSwitching)] )0 None:Disabled.[Setting Values: RREC, AWB, None]LoluxTo increase the sensitivity when in dimsurroundings, set a value in the Lolux mode.[Setting Values: 36dB, R30dB]Clip ReviewFor specifying the operation when any of the[USER1]-[USER7], [LCD KEY▲], [LCD KEY▶],[LCD KEY▼], or [LCD KEY◀] items is set to “ClipReview”.0 Last 5sec:Views about 5 seconds of the clip from theending.0 Top 5sec:Views about 5 seconds of the clip from thebeginning.0 Clip:Views the entire clip.[Setting Values: RLast 5sec, Top 5sec, Clip]Memo :0 This item is selectable when any of the [USER1]-[USER7], [LCD KEY▲], [LCD KEY▶], [LCDKEY▼], [LCD KEY◀] items is set to “ClipReview”.Spot MeterFor specifying the operation when any of the[USER1]-[USER7], [LCD KEY▲], [LCD KEY▶],[LCD KEY▼], or [LCD KEY◀] items is set to “SpotMeter”.(A P72 [Setting Spot Meter] )0 Max & Min:Displays the brightest and darkest areas of theimage.0 Max:Displays the brightest area of the image.0 Min:Displays the darkest area of the image.0 Manual:Displays the image brightness at a specifiedposition.[Setting Values: RMax & Min, Max, Min, Manual]100Menu Display and Detailed Settings
