Adjusting Color Matrix0 The color matrix of the camera recorder can beadjusted to a color of the user’s preference.0 When shooting is performed using multiplecameras, the colors of the different cameras canbe adjusted, and a color of the user’s preferencecan be set on this camera recorder.0 The Saturation, Hue and Lightness of theprimary and complementary colors (6 colors intotal) can be set individually.0 Adjust the color on the vector scope andwaveform monitor using the DSC color chart.* The adjusted values of “Standard”, “CinemaVivid”, and “Cinema Subdued” in [Color Matrix]can be stored individually.(A P104 [ Color Matrix ] )1 Select [Camera Process] B [Color Matrix]/[Adjust].(A P104 [ Adjust ] )2 Adjust Hue.0 Select the color using the cross-shapedbutton (JK) and confirm using the cross-shaped button (I). (The cursor moves toHue.)0 Pressing the cross-shaped button (J)rotates the hue in the clockwise direction onthe vector scope.0 Pressing the cross-shaped button (K)rotates the hue in the anti-clockwisedirection on the vector scope..RCyBGYI Mg RCyBGYI MgRCyBGYI Mg RCyBGYI MgRCyBGYI Mg RCyBGYI MgMagentaGreenBlueYellowCyanRed3 Adjust Saturation.0 Press the cross-shaped button (I) to movethe cursor to Saturation.0 Each of the colors changes in the directionindicated by the arrow on the vector scope.0 Pressing the cross-shaped button (J)moves the color outward from the center ofthe circle on the vector scope.0 Pressing the cross-shaped button (K)moves the color toward to the center of thecircle on the vector scope..RCyBGYI Mg RCyBGYI MgRCyBGYI Mg RCyBGYI MgRCyBGYI Mg RCyBGYII MgMagentaGreenBlueYellowCyanRed4 Adjust Lightness.0 Pressing the cross-shaped button (J)lightens; and pressing the cross-shapedbutton (K) darkens.0 Press the cross-shaped button (I) to returnthe cursor to Hue.138Camera Features
