Adjusting the LCD Monitorand ViewfinderYou can monitor video images on this camerarecorder using the viewfinder, LCD monitor, orboth. .DISPLAYNormal LCDInvertedLCDDisplays on the LCD Monitor andViewfinder Screen (VF)When [LCD/VF] B [LCD + VF] is set to “Off”(A P105 [ LCD + VF ] )LCD Monitor Status LCD Display VF DisplayLCD closed Normal LCD OFF ONInverted LCD ON OFF *LCD opened Normal LCD ON OFF *Inverted LCD ON OFF ** Turns on when [LCD/VF] B [LCD + VF] is set to“On”.Memo :0 Press and hold the [DISPLAY] button for 2 secondsto turn ON/OFF the LCD monitor.0 The function to switch between LCD monitor andviewfinder displays by pressing the [DISPLAY]button can be canceled by opening/closing orrotating the LCD monitor.0 The viewfinder screen is always displayed when[LCD/VF] B [LCD + VF] is set to “On”.0 You can display both the LCD monitor andviewfinder screens at the same time by setting[LCD/VF] B [LCD + VF] to “On”.(A P105 [ LCD + VF ] )Adjusting the LCD Monitor .21PEAKINGLCD BRIGHT3Tilt 90 degreesdownwardTilt 180 degreesupward1 Open the LCD cover.2 Incline the LCD cover to a position thatenables easy viewing.Rotate the LCD monitor to adjust the angle.0 While the LCD monitor is open, you canrotate it 180 degrees upward or 90 degreesdownward.0 Rotating the LCD monitor 180 degreesupward enables you to see the screen fromthe lens side. To display the image when it isviewed from the opposite direction (mirrorimage), perform setting as follows.Set [Main Menu] B [LCD/VF] B [LCDMirror] to “Mirror” B Set button (R)(A P106 [ LCD Mirror ] )3 Adjust the brightness, contour, andcontrast of the LCD monitor.You can change the angle and brightness of theLCD monitor according to your usage condition.Changing the brightness of the screen will notaffect the recorded images.Adjusting the BrightnessUse the [LCD BRIGHT +/－] button to adjust thebrightness of the LCD monitor.0 The [+] button brightens the monitor and the[－] button darkens it.0 Press the [+] and [－] buttons simultaneouslyto return to standard settings.0 During adjustment, the brightness level isdisplayed on the LCD monitor. .P13000K 1/ 100F1.60dBAE+6ND 1 /644030 20 10 0LCD BRIGHT -1036Preparations
