Performing LiveStreamingBy combining with the set top box decoder or PCapplication that supports live streaming, you canperform audio and video streaming via the network.Supported FormatsVideo0 1920x1080 / 60i (H), 60i (L)0 1280x720 / 30p (H), 25p (L)0 720x480/60i (U model)720x576/50i (E model)AudioAACSupported ProtocolsNetwork protocols : TCP, UDPTransport mode : MPEG2-TSSetting Distribution1 Set the [Record Format] according to theresolution and frame rate of the video to bedistributed. .1920x1080 1280x720 780x4801920x1080 60i, 30p 60i 30p 60i50i, 25p1440x1080 60i 60i 30p 60i50i 50i 25p 50i1280x720 60p, 30p 60i 30p 60i50p, 25p 50i 25p 50i780x480 60i 60i 30p 60iSettable Resolution duringStreaming/No. of FramesRecord FormatResolution/No. of Frames50i25p50iMemo :0 Live streaming cannot be performed in thefollowing cases.0 When a setting other than “HD” is selected for[Main Menu] B [System] B [Record Set] B[Record Format] B [System]0 When [Main Menu] B [System] B [RecordSet] B [Record Format] B [WFrame & BitRate] is set to “24p”2 Set the Resolution and Frame & Bit Rate forthe video to be distributed.Specify the settings in [Main Menu] B[System] B [Network] B [Settings] B [LiveStreaming Set].(A P118 [ Live Streaming Set ] )3 Set the distribution protocol.Specify the settings in [Main Menu] B[System] B [Network] B [Settings] B [LiveStreaming] B [Type].(A P119 [ Type ] )4 Set the IP address and port for thedestination of distribution.Specify the settings in [Main Menu] B[System] B [Network] B [Settings] B [LiveStreaming] B [Destination Address]/[Destination Port].(A P119 [ Destination Address ] )(A P119 [ Destination Port ] )Starting Distribution1 Perform the necessary setting for the settop box decoder and PC application.For details on the settings, please refer to theinstruction manual of the respective devicesand applications.Memo :0 If there is an NAT router within thecommunication path between the camera andthe decoder, port forwarding setup is required.For details on the settings, please refer to theinstruction manual of the router in use.2 With the network connection established,set [Live Streaming] to “On”.(A P143 [Preparing Network Connection] )0 Set [Main Menu] B [System] B[Network] B [Settings] B [Live StreamingSet] B [Live Streaming] to “On”.0 The network connection mark appears onthe display screen when a networkconnection is established. .100min50min282minP13000K 1/ 100F1.60dBAE+6ND 1 /645 . 6f t12 :34 :56Jan 24,201200: 00: 00.001920x108060 i HQ4030 20 10 0166Connecting to the Network
