Color MatrixFor setting the color matrix.0 Cinema Subdued:Sets to a subdued color matrix that is similar tothe screen characteristics of movies.0 Cinema Vivid:Sets to a vivid color matrix that is similar to thescreen characteristics of movies.0 Standard:Sets to a standard color matrix.0 Off:Sets the color matrix function to Off.[Setting Values: Cinema Subdued, Cinema Vivid,RStandard, Off]9 AdjustThis item is used to adjust [Color Matrix] to a coloraccording to the user’s preference.0 This item is used to adjust [Color Matrix] to acolor according to the user’s preference.0 The saturation, hue and brightness of theprimary and complementary colors (6 colors intotal) can be set individually.0 The adjusted values of “Standard”, “CinemaVivid”, and “Cinema Subdued” in [Color Matrix]can be stored individually.(A P135 [Adjusting Color Matrix] )[Setting range for Lightness/Saturation: -10 to +10](roughly ± 10 %)[Setting range for Hue: -5 to +5] (roughly ± 5°)Memo :0 This item cannot be selected when [ColorMatrix] is set to “Off”.Color GainFor adjusting the video signal color level.Increasing the value deepens the color.[Setting Values: -50 to +15, Off (R0)]Memo :0 Images are displayed in black-and-white whenthis is set to “Off”.Reverse PictureFor recording images correctly by setting this itemto “Rotate” when the lens image appears upsidedown or laterally inverted.0 Rotate:Enables horizontal/vertical inversion of theimage.0 Off:Disables horizontal/vertical inversion of theimage.[Setting Values: Rotate, ROff]Shooting ModeFor switching the settings for image recording onthe camera.0 Standard:Normal shooting mode.This setting is suitable for shooting low-noiseimage quality.Use this mode in well lit places.0 Extended:High sensitivity shooting mode.This setting enables recording in variousbrightness conditions.Use this mode in places where the lighting isdifficult to control and the brightness isinsufficient.[Setting Values: RStandard, Extended]Reset ProcessRestores all items in the [Camera Process] menuto their default settings.Detail/Adjust ItemV/H BalanceFor setting the H/V balance to enhance contour(detail) in the horizontal (H) or vertical (V) direction.0 H+1 to H+4:Increasing the value enhances contour in thehorizontal direction.0 V+1 to V+4:Increasing the value enhances contour in thevertical direction.[Setting Values: H+1 to H+4, RNormal, V+1 to V+4]Memo :0 When [System] under [Record Format] is set to“SD”, this item is fixed at “Normal”.0 When [System] under [Record Format] is set to“HD+SD”, this item can be set during HDrecording, but will be fixed at “Normal” during SDrecording.102Menu Display and Detailed Settings
