JBL DCR600 II Owner's Manual

Also see for CINEMA PROPACK 600: Owner's manual Service manual

JBL DCR600 II Owner's Manual Manual pdf 52 page image

52Operating the DCR600II ReceiverSurround Mode ChartMODE FEATURES DELAY TIME RANGEDolby Digital Available only with digital input sources encoded with Dolby Digital data. It provides Center: 0 ms – 5 msup to five separate main audio channels and a special dedicated Low-Frequency Effects Initial Setting = 0 mschannel. Surround: 0 ms – 15 msInitial Setting = 0 msDTS Available only with digital input sources encoded with DTS data. Available on special Delay time not adjustableDVD, LD and audio-only compact discs, DTS provides up to five separate main audiochannels and a special dedicated low-frequency channel.Dolby Pro Logic II Dolby Pro Logic II is the latest version of Dolby Laboratories’ benchmark surround technology 15 ms – 30 msMovie, Music and that decodes full-range, discrete left, center, right, surround right and surround left channels Initial Setting = 15 msEmulation from either matrix surround-encoded programs or conventional stereo sources.The Dolby Pro Logic II Movie mode is optimized for movie soundtracks, while the Pro Logic II Musicmode should be used with musical selections. The Pro Logic II Emulation mode re-creates originalPro Logic processing for those who prefer that presentation.Logic 7 C Logic 7 is an advanced mode that extracts the maximum surround information from either Delay time not adjustableLogic 7 M surround-encoded programs or conventional stereo material. The Logic 7 C, or Cinema, modeshould be used with any source that contains Dolby Surround or similar matrix encoding.Logic 7 C delivers increased center-channel intelligibility, and more accurate placement of soundswith fades and pans that are much smoother and more realistic than with other decodingtechniques. The Logic 7 M, or Music, mode should be used with analog or PCM stereo sources.Logic 7 M enhances the listening experience by presenting a wider front soundstage and greaterrear ambience. Both Logic 7 modes also direct low-frequency information to the subwoofer(if installed and configured) to deliver maximum bass impact.Dolby 3 Stereo Uses the information contained in a surround-encoded or two-channel stereo program to No surround channelscreate center-channel information. In addition, the information that is normally sent to therear-channel surround speakers is carefully mixed in with the front left and front rightchannels for increased realism. Use this mode when you have a center channel speakerbut no surround speakers.Theater This mode uses matrix surround decoding to simulate a standard movie or Delay time not adjustablestage theater.Hall 1, 2 The Hall modes offer a matrix surround choice that simulates a small (Hall 1) or medium-sized Delay time not adjustable(Hall 2) chamber hall.5-Channel Stereo This mode takes advantage of multiple speakers to place a stereo signal at both the front and No delay is available forback of a room. Ideal for playing music in situations such as a party, it places the same signal this modeat the front left and surround left, and front right and surround right speakers. The centerchannel is fed a summed mono mix of the in-phase material of the left and right channels.Surround This mode turns off all surround processing and presents the pure left- and right- No surround channelsOff (Stereo) channel presentation of two-channel stereo programs.