Chapter 1717-4717.5 FUNCTION (Operation/Inspection Mode)17.5.1 COPIER17.5.1.1 COPIER Items 0011-5844T-17-32COPIER > FUNCTION > INSTALLSub item Description LevelTONER-SUse it to stir the toner inside the developing assembly at time of installation.1Procedure1) Select the item to highlight.2) The message "Check the Developer" appears. Check to make sure that the connector of thedeveloping assembly is connected.3) Press the OK key to start the operation. The machine will stop automatically when a specificcount has been taken.Notes:The message "Check the Developer" is used to prevent disconnection of the connector thatcould otherwise occur when mounting the developing assembly.CARD Use it to make card reader settings as part of installation work.1ProcedureEnter a number between 1 and 2001, and press the OK key. (As many as 1000 cards may beused starting with the one bearing the number you enter.)At this time, the machine initializes the card control information (group ID and ID number).E-RDS Use it to make E-RDS settings (embedded RDS). 1Range0: disable RDS (off); 1: enable RDS (transmit all counter information)RGW-PORTUse it to set the port number for the server used by E-RDS. 1range: 1 to 65535COM-TESTUse it to check the connection to the server used for E-RDS. 11) Select the item to highlight, and press the OK key.2) Check the result expressed in OK or NG.COM-LOGUse it to indicate the details of the result of a test executed on the communication with theserver used for E-RDS. 1Procedure1) Select the item to highlight, and press an information item.history particulars: calendar, date, time, error code, error details (128 characters max.)RGW-ADRUse it to specify the URL of the server used for E-RDS. 1Procedure1) Select the item to highlight, and press an information item.2) When the URL input screen appears, press the OK key.(default: htts://a01.ugwdevice.net/ugw/agentif010)
