Chapter 1010-210.2 Counters10.2.1 Soft Counter 0011-2684The machine is equipped with soft counters to count the number of prints made, and the counter readingsmay be indicated by pressing the Check key on the control panel.The counter is controlled by the main controller PCB, and increases the count each time a copy/print ismade (as identified by the following sensors):T-10-1The machine's counting mechanism consists of 8 modes, 2 each according to paper size (small-size, large-size; a total of 16 modes):T-10-2*1: At time of shipment, B4 or smaller. To count B4 as a large-size sheet, use service mode.*2: The machine does not have a fax function, and will not count fax reception prints.The following table describes the counters according to model:- 100V/200VT-10-3- 208/230V Non-European ModelT-10-4Copying/printing operation Source of inputSimplexing finisher delivery sensorDuplexing 1st side PS142nd side finisher delivery sensorCopying/printing operation Large-size Small-size*1local copy A BPDL print C DBox print E Fremote copy print G Hfax reception print*2 I Jreport print K Lduplexing print M Nscan O PCounter Type*1 Default Default switchover*2Counter 1 total (A through L) ON fixedCounter 2 - OFF variableCounter 3 - OFF variableCounter 4 - OFF variableCounter 5 - OFF variableCounter 6 - OFF variableCounter Type*1 Default indication Defaultswitchover*2Counter 1 total (A through L) ON fixedCounter 2 total large (ACEGIK) ON variableCounter 3 copy 1 (ABGH) ON variableCounter 4 copy 1 large (AG) ON variableCounter 5 - OFF variableCounter 6 - OFF variable
