Chapter 1414-2814.8.13 Position of the Multifeeder LatchSolenoid (SL6) 0010-9352Slide the solenoid in the direction of A so that thegap between the shutter [1] and the shutter plate[2] is 0.4 -/+ 0.2 mm when the solenoid is drawn.F-14-65F-14-6614.8.14 Position of the Deck (right) PickupSolenoid (SL7) 0010-9353Use the screw [3] so that the distance from thepickup unit bottom of each cassette holder and thebushing bottom edge of the A roller support plateis 34.0 -/+ 0.5 mm when the plunger of the pickuproller releasing solenoid is drawn (as occurringwhen [1] and [2] are operated as shown). (Afteradjustment, make sure that the distance betweenthe paper face and the A roller is 2.5 -/+ 0.5 mmwhen the A roller is in UP position.)F-14-6714.8.15 Position of the Deck (Left) PickupSolenoid (SL8) 0010-9354Use the screw [3] so that the distance from thepickup unit bottom face to the bushing bottomedge of the A roller support plate is 49.5 -/+ 0.5mm when the plunger of the pickup releasing so-lenoid is drawn (as occurring when [1] and [2] areoperated as shown). (After adjustment, make surethat the distance between the paper face and the Aroller is 2.5 -/+ 0.5 mm when the A roller is in UPposition.)F-14-6814.8.16 Position of the Cassette 3/4Pickup Solenoid (SL9/10) 0010-9356Use the screw [3] so that the distance from the pick-up unit bottom face of each cassette holder and thebushing bottom edge of the A roller support plate is35.5 -/+ 0.5 mm when the plunger of the pickuproller releasing solenoid is drawn (as occurringwhen [1] and [2] are operated as shown). (After ad-justment, make sure that the distance between thepaper face and the A roller is 2.5 -/+ 0.5 mm whenthe A roller is in UP position.)F-14-69A[1] [2]0.4±0.2mm0.4±0.2mm[1][1][2][2]AView from A34.0±0.5mm[3][2][1][1][2]AView from A49.5±0.5mm[3][1][2][1][2]AView from A35.5±0.5mm[3]
