Chapter 88-348.11 Parts Replacement Procedure8.11.1 Cassette Pickup Assembly8.11.1.1 Removing the Right Deck /Cassette Pickup Assembly 0011-0030The removal procedure of a right door and a leftdoor is the same. An illustration makes a rightdoor an example and explains it.1) Slide out the right deck / cassette 3 / cassette 4.2) Open the right upper cover and the right lowercover.An attempt to remove the pickup assembly with-out removing the deck will cause the lifter to gettrapped, not holding the pickup assembly fromsliding out.3) Remove the mounting screw [1], and detachthe connector cover [2]; then, disconnect theconnector [3].4) Remove the three mounting screws [4], anddetach the pickup assembly [5].F-8-558.11.1.2 Removing the Vertical Path 3/4Sensor and the Cassette 3/4 PickupSensor 0011-00321) Remove the cassette 3/4 pickup assembly.2) Remove the screw, and detach the staticeliminator [2].3) Remove the screw [3], and detach the pickupassembly sensor base.F-8-564) Disconnect the connector [1] (1 pc. each), andfree the claw; then, detach the vertical path 3/4sensor [2] and the cassette 3/4 pickup sensor[3].F-8-578.11.2 Cassette Lifter Motor8.11.2.1 Removing the Lifter Motor (M16/M17) of the Cassette (3/4) 0010-89581) Slide out the front deck (right); then, slide outthe cassette 3/4.2) Remove the front lower right cover of thecassette assembly as instructed under"Removing the Vertical Path Roller 2."3) Remove the two fixing screws [1] of the liftermotor (M16/M17), and disconnect theconnector [2]; then, detach the lifter motor [3].F-8-58[3][4][4][5][1][2][2][3][4][1][1][1][3][2][1][2][2][3][3]
