Canon imageRUNNER 3300 Series Manual

Also see for imageRUNNER 2200 Series: Guide Copying guide

Contents

Canon imageRUNNER 3300 Series Manual Manual pdf 66 page image

Printing Problems5-65TroubleshootingPrinting ProblemsMeaningless characters are being printedA font that is different to the one specified is printedYou cannot print the last pageCause 1 You have printed from Windows without installing the printer driver for Windows that wasincluded with the printer.Solution Install the printer driver for Windows that was included with the printer and print the dataagain.Reference See the PCL Driver Guide and the PS Driver Guide.Cause 2 DOS application software printer settings are inadequate.Solution Reset the DOS application software printer settings on a printer that is compatible with themachine.Reference See the PCL Driver Guide and the PS Driver Guide.Cause The “Replace with TrueType font” setting has been set on the printer driver for Windows.Solution Set the “Replace with TrueType font” setting to the correct setting and print the data again.Reference See the Help function on the printer driver.Cause The command that identifies the end of the data has not been sent from the PC. (TheProcessing/Data lamp is flashing or lit.)Solution Clear the print data. (When you print from application software that does not have a printfunction and the last page of data is less than one page, the data will remain in the printer’smemory.)Reference See “Operating Print Jobs Sent from a Computer,” in the Reference Guide.